Cormak HBS 275 Vario 27 mm 400V Band Saw
-
Cormak HBS 275 Vario 27 mm 400V Band Saw
-
Most important advantages:
Control panel is located by the arm. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear set of carbide guides.
Belt drive is protected by an unlockable guard attached to the body on hinges. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside.
Control panel is located on a separate arm. The main cutting motion in the cutting process is moving the cutting band. The arm lowering speed (the cutting speed) is adjusted with a hydraulic cylinder.
Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks.
Technical data
Cutting band size
|
2450×27×0.9 mm |
Band tension
|
mechanical (manual)
|
|
Band speed |
20 - 90 m/min |
Arm lowering control
|
stepless – hydraulic cylinder |
|
Vice base height |
900 mm
|
Diameter of saw wheel
|
300 mm |
Power supply
|
3-phase, 400 V
|
|
Total power |
1,5
|
Cooling pump motor power
|
0.045 kW
|
|
Weight |
235 kg
|
|
Angle |
 |
 |
 |
|
0º |
ø220 |
270x140 |
225x225 |
|
30º |
ø190 |
200x140 |
180x180 |
|
45º |
ø160 |
160x140 |
160x160 |
|
60º |
ø100 |
120x100 |
100x100 |
-
Alternative goods
1996.50€
2625.70€
You save
629.20€
